I just received my Saturn modchip from the Racketboy store. For installation, I chose the A+B method, since I have the 64-pin IC (Model 2). Sadly, when the system boots up, I get a green cube on the left-hand side and a green sphere to the right. The message is "Checking disc type" (or format... one of the two).
What puzzles me is the fact that the pins on the modchip seem to be on the opposite side of the metal contacts on the PCB. However, I installed the modchip so that the soldered side faces away from the system, with the ICs facing the system (as noted on all Websites). For giggles, I turned the chip around to no avail. When I remove the chip, my system works just fine.
Any ideas?
What puzzles me is the fact that the pins on the modchip seem to be on the opposite side of the metal contacts on the PCB. However, I installed the modchip so that the soldered side faces away from the system, with the ICs facing the system (as noted on all Websites). For giggles, I turned the chip around to no avail. When I remove the chip, my system works just fine.
Any ideas?